TESTER, HAND-HELD TABLET METER, POOL WATER, MEASURING CHLORINE AND PH IN POOL
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Biocidal products should be used taking precautions.
Read the label and product information before each use.
POOL CHEMISTRY
NTCE POOLTESTER
POOL TESTER
FOR MEASURING CHLORINE AND PH
Tester used to control pH and free chlorine in water. Controlling and correcting these parameters in water is very important, it affects the safety of users of swimming pools, jacuzzis and water reservoirs.❗❗❗
⭐⭐⭐Maintaining the correct pH value is the most important task in pool water care.
This value has a decisive impact on other treatments aimed at maintaining high quality of pool water.
➕ FOR FREE
YOU RECEIVE A GUIDE ON HOW TO CARE FOR POOL WATER
"The ABC of POOL CHEMISTRY, OR HOW AND WHY TO USE POOL CHEMICALS"
⭐CL and pH tablets: quickly soluble in water, color the water in the tester depending on the concentration
⭐ Quick and easy control of water parameters
⭐Safe Cl level: 1mg/l
⭐Safe pH level: 7.2 - 7.4
✴️THE SET INCLUDES:
- container with separate chambers for measuring pH and Cl
- 30 tablets DPD 1
- 30 tablets Phenol Red
- user manual
✴️Important notes:
- Touching the indicator tablets with your fingers leads to measurement errors.
- The measurement results should be read immediately after the indicator tablets dissolve in the water sample.
- After each measurement, in order to avoid errors caused by sample residues, the tester chambers should be thoroughly rinsed with water. and closing cover.
- PH values below 6.8 always produce a yellow color. pH values above 8.2 always produce a red color.
Indicator tablets are intended only for chemical analyses, they must not be used for other purposes.
Prevent children from coming into contact with indicator tablets.
b>
✴️How to use:
1. Remove the protective cover from the tester chambers.
2. Rinse the tester chambers with the tested water.
3. Fill the chambers to the brim with the water sample.
4. To measure pH: insert one Phenol Red
5 tablet directly into the appropriate chamber. Replace the cover protecting the tester chamber.
6. To measure free chlorine: insert one DPD
7 tablet directly into the appropriate chamber. Replace the cover protecting the tester chamber.
8. Shake the tester to mix the water sample so that the tablets dissolve completely.
9. Read the measurement value from the scale. The tester should be held against the light.
PO WHEN YOU PURCHASE "ABC OF POOL CHEMICALS", WE WILL SEND YOU BY EMAIL
BLUE WATER
SWIMMING POOL
POOL CHEMICALS
PRODUCT CODE: 73602
feedback Report comment