Jacuzzi swimming pool starter kit 7in1, swimming pool chemicals, chlorine tablets

WESSPER POOL CHEMISTRY STARTER SET - 5in1 + MULTIFUNCTIONAL TABLETS 1kg 20g BLUE + pH BALANCER PLUS 1kg = 7in1

The set includes:

✅ CHLORINES GRANULES SHOCK - 1kg

✅ ANTIALGAE - 1l

✅ FLOCKSTOP - 1l

✅ pH BALANCER PLUS - 1kg

✅ pH BALANCER MINUS - 1.5kg

✅ MULTIFUNCTIONAL TABLETS - 1kg BLUE WATER

✅ HAND TESTER

✅ MEASURING POSITION

✅ BOOK ABC OF POOL CHEMISTRY

WESSPER FLOCKSTOP - PREPARATION FOR MAINTAINING THE TRANSPARENCY OF POOL WATER 1l

A preparation that improves filtration efficiency in the swimming pool.

How to use:

• works optimally at pH 4.5-9
• water temperature and current water treatment methods do not affect its effectiveness - however, it works best with continuous dosing

Wessper FLOCKSTOP causes small turbidity particles to stick together into larger ones, which are retained during filtration.

Dosage:

• manually or using a dosing pump
• the product should be diluted in the ratio 1:10 (for high-performance pumps) - for continuous use, set the dosage at 0.5 - 1.5 g for each m3

Before administering the preparation, it is worth regulating the pH of the pool water between 7.0-7.4 using appropriate pH correctors - in the form of liquid or granules.

After this operation, add the FLOCKSTOP preparation to the pool water in an amount of 20 to 100 ml per 10 m³ of water. In case of high turbidity of water, the dose can be doubled.

WESSPER ANTIALGAE 1l

Non-foaming liquid preparation with bactericidal,yeast and algaecide intended for disinfecting water in swimming pools, fountains and ponds (not stocked with fish). Effective against bacteria:

• Pseudomonas aeruginosa (Pseudomonas aeruginosa),
• Escherichia coli (Escherichia coli),
• Staphylococcus aureus(staphylococcus aureus),
• Enterococcus hirae(fecal streptococcus),
• Legionella pneumophilla.

Cyclic dosage from 100-200 ml/10m3 once a week.

• The product is intended for disinfection and removal and preventing the development of algae in both indoor and outdoor swimming pools.
• Dose the AntiAlgae product directly into the pool or using automatic dosing systems, in the evening, after end of the bath.
• Recommended doses: The product has a bactericidal and yeasticidal effect at a concentration of 0.008% (80g/1m3 of water), an algacidal effect at a concentration of 0.005% (50g/1m3 of water) during contact 72 hours.

WESSPER BALANCER PH- 1.5kg

Fast dissolving granules for lowering the pH value of swimming pool water.

Preparation used to lower the pH value of water from alkaline to the ideal range (pH-7.0-7.4).

Usage:

• 1.5kg of the pH- product granulate allows you to reduce the pH value by approximately 0.2 in 100m3 of swimming pool water.
• The required amount of the product should be dissolved in water and dispensed into the circulation in several doses. Hardness affects product performance. Depending on the hardness of the water, the amount of agent needed may increasefor hard water and decrease for soft water.

WESSPER CHLORINEGRANULES SHOCK 1kg

Preparation in the form of granules intended for combating algae, bacteria and fungi in swimming pools and for disinfecting surfaces in contact with food, not in contact with food and in veterinary hygiene.

Usage:

• Granula for disinfecting swimming pool water. It has a bactericidal effect at a concentration of 5g/m3 of water. Effectiveness is achieved after 24 hours. In the case of home swimming pools, disinfection should be carried out in the evening. You can use the swimming pool the next day.
• After the disinfection process, the concentration of active chlorine in the water should comply with the permissible values ​​specified in the Regulation of the Minister of Health on the quality of water intended for human consumption and on the requirements to be met by water in swimming pools.

WESSPER CHLORINE MULTITABLET BLUE 20G 1KG

How to use?

✅ If the active chlorine content exceeds 0.5 mg/ dm3, you should not use the swimming pool.

✅ Lower the chlorine dose and wait until this value falls within the designated range.

✅ You can also reduce the active chlorine contentusing a chlorine deactivator.

✅ The content of active chlorine in swimming pool water and the pH reaction should be checked regularlyusing appropriate tests to measure these parameters.

✅ The total dose of active chlorine should not exceed 0.5mg/dm3of swimming pool water when used by humans

✅ Effective dose of the product: 200g tablet – for 40m3 of water

✅ Blue colorant - deepens the blue shade of water. Gives the water a blue tint!

Multifunctional tablets 10 in 1:

1️⃣ Descaling

2️⃣ Glonastic action

3️⃣ Disinfection

4️⃣ Bacteriostatic effect

5️⃣ Water clarification

6️⃣ Flocculation

7️⃣ Stabilization of free chlorine

8️⃣ Shine

9️⃣ Bactericidal effect

1️⃣0️⃣ pH stabilization

1️⃣1️⃣ Blue water

BALANCER PH+ 1KG

✅ Preparation used to raise the pH value of water from acidic to the ideal range (pH = 7.0 - 7.4).

✅ pH Balancer + granules 1 kg allows you to raise the pH value by approximately 0.2 in 100 m3 of swimming pool water. p>

USE:

✅ The necessary amount of the product should be dissolved in water and dispensed into the circulation in several doses.

✅ Water hardness affects product performance. In case of hard water, the required amount of dosed agent may increase, and in case of soft water it may decrease.

PH/Cl TESTER

Pooltester - the tester is an analytical measuring device that visually measures pH and chlorine in water.

How to use:

• Open the measuring container.
• Fill the container with the tested water.
• Put the appropriate tablet into the appropriate chambers. (pH Phenol Red Rapid Cl/Br mg/l DPD Rapid). li>
• Close the container and shake to dissolve the tablets.
• Check the color reading organoleptically
• Rinse and clean the measuring container thoroughly.

The appropriate level of chlorine and the appropriate pH of pool water are the most important parameters determining water quality. The ideal level of free chlorine in water is 0.6-1.0 mg/l. The optimal pH value is between 7.0 and 7.4.

MEASUR

Measuring cup for granules.

The set also includes a "ABC swimming pool" guide -a clear instruction, thanks to which you will learn how to use the products from the Wessper Start 5in1 set.

ABC OF POOL CHEMICALS - HOW AND WHY TO USE POOL CHEMICALS

✅ Water pH regulation - only a level from 7.0 to 7.4 pH guarantees optimal operation of pool chemicals. Particular attention should be paid to the water pH during weather changes, e.g. during hot weather when the pH increases, while in decreases during rain. Water pH should be checked once a week.

✅ Disinfection - treatment of swimming pool water using the chlorine method, which is commonly used and the most effective. Chlorine in swimming pool chemicals kills viruses, bacteria and destroys organic compounds that may appear in the water. Disinfectants should be used from the first time the tank is filled with water.

✅ Fighting algae - lots of sunlight in the pool and high temperatures favor the appearance of algae in the tank. They appear in the form of slippery greenish deposits on the walls and bottom and multiply very quickly. They are the reason the water changes color to green-brown. To fight algae, chlorination of water is not enough, so you should use an appropriate preparation intended for this purpose.

✅ Coagulation - Sand filters included in the filtration system can only retain particles of the appropriate size. When an appropriate preparation is used, the water undergoes a coagulation process, i.e. the particles combine. Thanks to this, the filters can retain all, even the smallest, contaminants.

The biocidal product should be used with caution. Read the label and product information before each use.

H290 - May be corrosive to metals.

H272 - May intensify fire; oxidizer.

H302 - Harmful if swallowed.

H318 - Causes serious eye damage.

H335 - May cause respiratory irritation.

H410 - Very toxic to aquatic life with long lasting effects.

H319 - Causes serious eye irritation.

H302 - Harmful if swallowed.

H314 - Causes severe skin burns and eye damage.