CHLOR 10in1 MULTI TABLETS + DISPENSER WITH THERMOMETER

SET CONTAINS

✓ 10 Pcs 10in1 TABLETS 20g MULTIFUNCTIONAL BLUE COLOR

✓ DISPENSER WITH THERMOMETER FOR 20g TABLETS

20g - 1 tablet is enough for 4,000l of water every 5-7 days

Only available from us HIT eBayde NTCE Multi 20g BLUE - slowly soluble chlorine in the form of 20 gram tablets. Chlorinehas a multifunctional effect, which has been described above.

The preparation has a 2-phase effect: in the first phase, the blue part of the tablet - antialgae and the colorant - dissolves , which gives the water a bluer tint, while the next stage is the gradual and slow release of chlorine, which has bactericidal, algaicidal and fungicidal effects.

By dosing1 tablet of 20 g per 4 m3 you will maintain the water proper chlorine level.

Tablets should be placed in a skimmer or floating dispenser because if thrown directly into the pool they may discolor the bottom of the pool.

Preparation dissolves about 5-7 days depending on the water temperature and chlorine level in the pool.

It is used for the so-called permanent disinfection, i.e. maintaining the correct chlorine concentration, before using Aqua Chlor Multi 20 g, you should perform shock disinfection with CHLOR SHOCK FOR POOL GRANULES T56 NTCE.

We remind you to take precautions when dosing chemicals.

Multifunctional preparation in the form of 10-in-1 20g chlorine tablets for permanent disinfection of swimming pool water.

Prevents the formation of algae and facilitates flocculation.

1 TABLET OF 20g IS INTENDED FOR 4 m3 OF WATER

USE:

USE: b>

1 tablet is enough for 4m3 of pool water, put it in a float or skimmer. Depending on the weather, water temperature and number of bathers. The effect of the tablet lasts for about a week. It is recommended to maintain the free chlorine content in the swimming pool basin at the level of 0.6 mg/l and the pH value at 7.0 to 7.4 (according to the DIN standard)

* They increase the level chlorine in water

* Removes and prevents the formation of algae (glonostatic effect)

* Destroys molds, bacteria, fungi and viruses

* Provides immediate disinfection

* Bacteriostatic effect

* Water clarification (flocculation)

* High content of active chlorine (disinfection through active chlorine)

* Stabilization of free chlorine

* Bactericidal effect

* Stabilization of the pH value

* Effective for all water hardnesses

* Stabilized against too rapid loss of chlorine under the influence of heat and sun

Disinfection step by step:

Step one - adjusting the pH value

The pH value is the most important parameter that affects the effectiveness of the disinfection process. Therefore, its size should be controlled and kept constant. The ideal pH range is between 7.0-7.4. Our preparations for increasing the value of this parameter: pH plus granules, pH plus liquid; to lower: pH minus granules, pH minus liquid.

Step two - disinfection

Pool water should be a source of well-being and health, and therefore must be safe for those enjoying water fun. Every person bathing in the pool brings particles of organic compounds and thousands of bacteria into the water. Therefore, it is necessary to use a disinfection process that is effective enough to ensure the safety of people using the bath. We recommend for disinfection using the chlorine method: Chemochlor T granules 65 and Chemochlor T quick tablets (for quick disinfection), Chemochlor T tablets 20g, Chemochlor T tablets 200g, Chemochlor T Multifunctional tablets. Chemochlor CH tablets 10g, Chemochlor Liquid. For oxygen disinfection: Aquablanc O2, Aquablanc A, Active oxygen tablets 20g, Active oxygen tablets 200g, Active liquid oxygen, Aquablanc liquid

Step three - fight against algae

Algae are single- or multi-cellular organisms that produce organic compounds from inorganic chemical compounds contained in water, which are a breeding ground for bacteria in the water and a source of various types of pollutants. They multiply very quickly and within a few hours they are able to cover walls, stairs and the bottom of the pool with a slippery layer. It is therefore necessary to inhibit the growth of algae and eliminate them from swimming pool water. For this purpose, algaecide compounds should be used. Chemoform Polska recommends the systematic use of quaternary amines in the form of the following preparations: Alba, Alba Super, Antygon Super and Calzelos.

Step four - coagulation and filtration

Some Pollution particles are so small that filters cannot catch them. To remove them, coagulating or flocculating agents should be used, which cause smaller particles to aggregate into larger ones or absorb them on the flocculant surface. As a result of this treatment, these impurities remain on the filter and the water will remain clear and clean. We offer the following preparations: Flockfix liquid, Flockfix highly concentrated, Flockfix cartridges.

Step five - maintaining cleanliness and care of the swimming pool facilities

Maintaining the cleanliness of the swimming pool facilities and the surroundings of the basin swimming pool is very important if we want our swimming pool to meet our expectations and hygienic and sanitary requirements