Pool Chemicals for the Pool Chlorine Tablets 200g MultiTabs 3kg 3in1 Disinfection

CHLORINE TABLETS MULTI 3KG 200G - GAMIX

Chlorinated agent for continuous disinfection of swimming pool water - slowly dissolving. The tablets areeasyandconvenient to use. The water is fresher and feels more pleasant for a longer time. Chlorine multi tablets: Disinfection, water clarification and bactericidal and fungicidal effect.

Before using multi chlorine tablets from Gamix, you should adjust the pH of the water in the swimming pool - systematically check the chlorine concentration and pH using a water analysis kit to ensure effectiveness chlorine and, if necessary, adjust the pH of the water (ideally between 7.0 and 7.6).

Dosage (preferably in the evening after bathing):

• one tablet per 10m3 per week;

Keep the content of active chlorine at 0.3 mg/l - in the event of water turbidity or its replacement, the active chlorine content should be increased to 6 mg/l using shock chlorine.

The agent should be used in accordance with the manufacturer's recommendations.

CRYSTALLINE WATER IN 5 STEPS

1. pH correction

Before dosing chlorine, check and equalize the pH level of the water. This is important because if the pH value of the water is wrong, chlorine may not work or may be too aggressive. The ideal pH value of swimming pool water should be in the range of 7.0 - 7.6.

2. Shock chlorination

After disassembling the pool or replacing the water, shock chlorination of the water should be carried out. After dosing, the biocidal effects are almost immediate. The best agent for this is Chlorine Shock.

3. Disinfection

To maintain a sufficient amount of active chlorine in the water, use slow-dissolving chlorine tablets.

4. Algae control

To prevent the appearance of algae and unpleasant slippery sides and bottoms, use Alga Off.

5. Coagulation

To maintain water crystallinity, use liquid coagulant. This agent uses coagulation to compact small impurities into larger clusters that can be filtered by the pump.

MOST COMMON POOL WATER PROBLEMS

1. Milky or cloudy water

Improper pH: Adjust pH between 7.0 and 7.6. Perform shock treatment.

The chlorine level is insufficient: perform shock and flocking treatment, start washing the filter again, run filtering for 24 hours.

Insufficient filtering: increase the filtering duration. At high temperatures min. 10-12 hours a day.

2. Green water:

Appearance of algae: perform shock chlorination, wash and rinse the filter, perform flocculation and use an anti-algae preparation.

3. Limestone deposit:

Incorrect pH: adjust pH between 7.0 and 7.6.

Increased hardness: add water softener.

4. Brown, red, black water:

Presence of iron or magnesium: adjust the pH between 7.0 and 7.6, perform shock chlorination, liquid flocculation, stop filtering for 12 hours, then suck out the sediments from the bottom.

5. Odor of chlorine, irritation of eyes and skin

Incorrect pH: adjust pH between 7.0 and 7.6.

Presence of chloramines: perform shock chlorination.

6. Difficulty maintaining chlorine or pH levels:

Chlorination insufficient for frequent use: perform shock chlorination and equalize the pH level between 7.0 and 7.6.

7. pH too high:

Too high alkalinity: check the water pH often, add pH minus.

8. pH too low:

Too low alkalinity: check water pH frequently, add pH plus.