1kg CHLORINE 20g POOL MULTIFUNCTIONAL TABLETS JACUZZI SPA POOL FLOAT
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Biocidal products should be used with caution.
Read the label and product information before each use.
POOL CHEMICALS
PLANET POOL
CHEMISTRY 0508-1KG
CHEMOCHLOR T MULTITABLE TABLETS
MULTIFUNCTIONAL TABLETS
CHLORINE FOR POOL, JACUZZI, SPA
1kg package
so you get approx. 45 tablets 20g
✴️ BLUE WATER ✴️
Slow-dissolving multifunctional tablets with bactericidal effect , for long-term disinfection and clarification of swimming pool water.
⭐⭐⭐ TABLETS 10in1 ⭐⭐⭐
1. DESCALING
2. GLONASTICAL ACTION
3. DISINFECTION
4. BACTERIOSTATIC EFFECT
5. Clarification of water
6. FLOCULATION
7. FREE CHLORINE STABILIZATION
8. SHINING
9. BACTERICIDAL EFFECT
10. pH STABILIZATION
⭐⭐Solid chlorine preparation in tablet form (20g) ⭐
disinfection through active chlorine,prevents the formation of algae,flocculation of suspensions,stabilizes the pH value,dissolves very slowly.⭐⭐ USE OF TABLETS ⭐⭐⭐
Chlorine tablets with bactericidal effect for disinfecting water in swimming pools. Available tablets: 200 g and 20 g. Check the pH of the water. It should be 6.8 – 7.4. If the value is different, use the Balanre pH minus or Balancer pH plus corrector. The recommended application temperature is 25°C. Dosing should be carried out when there are no bathers in the pool using a dosing buoy or skimmer - placing the appropriate number of tablets in them and turning on the circulation pump.
At the same time, chlorinate the water using using a preparation for quick chlorine disinfection, so that the level of active chlorine in the water is 0.3 - 0.5 mg/dm3. If the active chlorine content drops below 0.3 mg/dm3, the number of tablets in the buoy or skimmer should be increased. If the active chlorine content exceeds 0.5 mg/dm3, you should not use the pool. Lower the chlorine dose and wait until the value drops to the designated range.
You can also lower the active chlorine content using a chlorine deactivator. The content of active chlorine in swimming pool water and the pH should be checked regularly using appropriate tests to measure these parameters. The total dose of active chlorine should not exceed 0.5 mg/dm3 of swimming pool water when used by people in accordance with the Regulation of the Minister of Health on the requirements to be met by water in swimming pools (Journal of Laws of 2015, item 2016).
⭐⭐ DOSAGE ⭐⭐
1 tablet of 20g is enough for 2m3 of swimming pool water.
The pH value and chlorine content should be checked regularly.
Ideal pH values: 7.0-7.4.
Ideal chlorine value: 0.6 mg/l.
⭐⭐Multifunctional chlorine preparation ⭐⭐ h2>
- Tablets that dissolve very slowly/long time
- Raise the level of chlorine in water
- They remove and prevent the formation of algae (alganostatic effect)
- Destroy molds, bacteria, fungi and viruses
- Provide immediate disinfection
- b>
- Bacteriostatic effect
- Water clarification (flocculation)
- High active content chlorine (disinfection through active chlorine)
- Stabilization of free chlorine
- Bactericidal effect
- Stabilization of the pH value
- Effective for all water hardnesses
- Stabilized against too rapid loss of chlorine under the influence of heat and sun
- Suitable for long-term storage
- Application: home swimming pools without an automatic dosing station, swimming pools with an automatic dosing station
- b>
BLUE WATER
SWIMMING POOL
POOL CHEMICALS
PRODUCT CODE: 20677
feedback Report comment