JPD-100S6 MEDICAL baby fetal heart rate detector

✅ Included:

⭐DETECTOR

⭐ 2 AA BATTERIES

⭐ INSTRUCTION MANUAL IN POLISH

✅ Medical Fetal Heart Rate Detector JUMPER JPD-100S6

✔️ Detects fetal heart rate from the 16th week of pregnancy.

✔️ Backlit LCD display

✔️ This is a medical device - professional equipment ensures correct measurements.

✔️ Built-in speaker and mini jack input that allows you to connect headphones

The fetal heart rate monitor is perfect for between visits to the doctor. The condition of the fetus may change rapidly and even regular medical examinations may not be able to detect abnormalities in a timely manner.

✅ JUMPER Medical Fetal Heart Rate Detector JPD-100S6

⭐⭐⭐⭐⭐

Listen to your baby's heartbeat! ❤️

• It has a built-in loudspeaker and a headphone jack.
• The medical device ensures correct measurements.
• Clear LCD display b>showing the fetal heart rate
• Allows you to monitor the baby's heart rate.
• Three operating modes: actual FHR display mode, average FHR display mode and practical manual mode
• It is used in gynecological and obstetrics practice.
• Suitable for use after the 16th week of pregnancy.
• Easy to use, light and convenient to carry.
• Head frequency 3 MHz.
• Pulse frequency measurement range 50 – 210 bpm (beats per minute).
• Real-time measurement.
• Battery level indicator.
• Highly sensitive probe that allows you to check the baby's heart rate from the 16th week of pregnancy
• CE 0482 certificateThe product system complies with the essential requirements of the medical device directive 93/42/EEC.
• The set includes 2x AA batteries and an operating manual in Polish.

It will work well both at home and in gynecological and maternity wards and in antenatal schools.

✅ Pregnancy without stress and anxiety

The time between visits is long for every future mother. Being able to hear your baby's heartbeat is always a priceless feeling. Thanks to this device, you can experience these unforgettable moments in the comfort of your home - not only in the doctor's office.

Experience wonderful moments with your partner - together you can listen to your baby.

✅ Equipped with a digital LCD display

Allows you to view the fetal heart rate in real time. In addition, it offers as many as 3 operating modes, including real FHR display mode, average FHR display mode and a practical manual mode.

✅ The JPD-100S6 fetal heart rate detector is a medical device class IIa - ensures precise measurement

✔️ FHR – fetal heart rate measurement.

✔️ Clear display.

✔️ 3 Doppler modes.

✔️ Built-in speaker and headphone jack.

✔️ Smooth volume control.

✔️ Waterproof, extremely precise head.

✅ Extremely sensitive PROBE made using Doppler technology.

✔️ Medical precision

✔️ Probe frequency 3MHz

✔️ Fetal heart rate measurement range: 50BPM-210BPM (beats per minute)

✅ The fetal heart rate (FHR) is extremely important and is the basis for checking whether the fetus is healthy.

Recording changes in FHR helps detect signs of fetal hypoxia. Home fetal monitoring mainly involves listening to the fetal heartbeat and checking for FHR changes, which help greatly increase fetal safety. Reference fetal heart rate range: 110bpm-160bpm

✅ The fetus moves in the pregnant woman's belly and therefore the fetal heartbeat detection position may change.

Depending on the stage of pregnancy, the pulse can be felt in different places on the belly. You should patiently and calmly determine the position of the baby in the belly.

1. Early phase - before the 24th week of pregnancy, the fetal heartbeat may be detected in the middle of the abdomen or in its area below the navel.
2. Middle phase after the 26th week of pregnancy, the fetal heartbeat may be detected most clearly at the fetal back. Fetal movement is usually the movement of the fetal limbs. When fetal movement is often felt on the right side of the abdomen, the fetal heartbeat can usually be detected on the left side of the abdomen and vice versa.
3. Final Phase - Head position and buttock position may also affect fetal heartbeat detection. If the fetus is in the head position, the fetal heartbeat can be detected on the left or right side below the navel. If the fetus is in the breech position, the fetal heartbeat can be detected on the left or right side above the navel.

✅ It's normal for your baby's heart rate to fluctuate - it changes depending on what you do.

The fetus will respond to a change in your position, e.g. from sitting to lying down. Activity may also be triggered by the mother's strong emotions, sounds that reach the baby, and food (e.g. sweets).

✅ FHR changes most during the following periods:

• Within 30 minutes after getting up for a pregnant woman
• Within 60 minutes after lunch for a pregnant woman
• Within 30 minutes before falling asleep for a pregnant woman (normal)

✅ Display interface:

1️⃣ Working mode:

• ❤️1 actual FHR display mode
• ❤️2 average FHR display mode
• ❤️3 practical manual mode

2️⃣ Number of fetal heartbeats per minute

3️⃣ Probe frequency

4️⃣ Battery charge level

✅ Many useful buttons and functions

1. Button for selecting the operating mode
2. Power button
3. LCD display
4. Backlight control button
5. 3 MHz ultrasonic probe
6. Speaker
7. Battery compartment
8. Headphone jack

✅ To To fully enjoy its functionality, we encourage you to read some simple but important tips:

➡️ Remember to wash the probe carefully after each use

➡️ When you do not plan to use the device for a long time, we recommend removing the battery. This simple action will preserve their life and avoid accidental discharge.

➡️ Our fetal heart rate detector is a helpful tool, but please remember that it does not completely replace conventional methods of measuring heartbeats. If you have any doubts, always consult your doctor ❗

➡️ If the measurement results cause concern, do not worry - repeat the measurement several times. If necessary, also use other available measurement methods. Your well-being is most important to us!

✅ Technical specifications

• Acoustic operating frequency: 3 MHz ± 10%
• Overall sensitivity (200 mm from probe surface): not less than 90 dB
• Spatial/temporal peak acoustic pressure :< 0.1 Mpa Ultrasonic output power: ≤ 20 mW
• Effective area of ​​the active element of the ultrasonic transducer: 2.08cm2
• LCD display dimensions: 44.5 mm x 23 mm
• li>
• FHR measurement range: 50 – 210 bpm
• Precision: ± 2 bpm
• Power supply: 2x AA batteries (included in the box)
• Dimensions : Length: 130 mm; Width: 100 mm; Height: 36 mm
• Weight: 250 g ± 5 g
• Built-in speaker: Yes
• Audio output: Yes, mini jack
• Volume control: Yes
• Battery level indicator: Yes
• The device is CE0482 certified

✅ The set includes

• JUMPER JPD-100S6 Medical Fetal Heart Rate Detector
• 2xAA batteries
• User manual in Polish