PETZL Rollclip A Triact-Lock P74 pulley carabiner

PETZL Rollclip A Triact-Lock P74 TL pulley carabiner

The pulley carabiner is available in a version with or without the TRIACT-LOCK locking system. The

version with the TRIAC-LOCK locking system can be used to reduce friction on the working rope or to install lashings. The non-locking version can be used to create

balance during short rope ascents with the ASCENSION device.

● Makes manipulation easier:

- Keylock system protects against accidental hooking carabiner lock when attaching the pulley.

- Opening of the arm on the pulley side for easier installation when the pulley is attached to the anchor point.

- A CAPTIV crossbar can be attached to it, which keeps the carabiner in position longitudinal axis parallel

to the load direction reducing the risk of rotation.

- Ball bearings ensure excellent performance.

● Available with or without locking system:

- with TRIACT-LOCK locking system: can be used to reduce friction on the work line,

and at the same time is easy to put on. It can also be used to change the installation of guy ropes.

- without a locking system: after attaching to the upper hole of the ASCENSION ascender

it can be used as a point of changing direction during short rope ascents.

p>

● H ​​cross-section

- ensures optimal weight/strength ratio,

- protects markings against abrasion.

Material: aluminum

Rope diameter: min 7 mm max. 13 mm.

Roll diameter: 18 mm

Maximum working load: 2 x 2 kN = 4 kN

Efficiency: 85%

Strength longitudinal axis: 20 kN

Strength transverse axis 8 kN

Strength with an open lock 7 kN