LARGE SIEVE sieve 90 3.5 SINK Franke Teka and others
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Fits sinks with a 90 mm mounting hole - 3.5" thread for a 1 1/2" siphon and an M12 drain thread. In thick sinks (stone) and in occasional cases in sheet metal sinks, a longer screw is required. You can use an old one or buy an additional one - we have it in our offer)
If the old sieve (not the plug) was much deeper after installing the (shallower) one, you may also need a longer screw.
Installation in large sink holes 88.90 mm, i.e. 3.5" siphon thread 1 1/2" or in other words 6/4". The structure (flange) allows installation in holes ranging from 88 to 110 mm. - we are talking about the hole in the sink .
The sieve (an element permanently installed in the sink) has a diameter of 113 millimeters at its widest point - edge (therefore it can cover the hole 110).
High quality of workmanship.
The set includes a plug (basket with strainer), socket (strainer), screw.
Such a set ensures the correct operation of the plug because the plug itself does not always fit sockets from other manufacturers.
Stainless steel basket with socket and handle
feedback Report comment