Matte protective foil for skis, snowboards and ECO

Switch DECK GUARD ECO

This transparent film will protect the tops of your skis or snowboard from scratches and damage, while allowing the graphics to show through. After sticking, it is practically invisible. The hard, transparent tape is covered with a self-adhesive layer that ensures perfect bonding. Durable adhesive allows use at low temperatures. The foil also protects the board or skis against UV radiation, which extends their life.

Not recommended for textured/matte skis and boards. The best effect is achieved on new boards and skis.

Thickness 0.2 mm - hard to damage!

30cm wide - enough to cover any snowboard or pair of skis.

Length - Sold in a tape. Any length is possible. 1 piece is 30 cm. When measuring, we recommend at least about 10 cm of space.

For purchases over 1.5m, the pressure doctor blade and cleaning fluid before gluing are free of charge.

Installation tips:

• Clean the top layer of your skis or snowboard with isopropyl alcohol using a lint-free cloth.
• If applying to a pair of skis, cut the tape in half to have two pieces.
• Carefully trim the excess material from the pre-existing grooves with a cutter so that the film lies flat.
• Align and center the cut piece.
• Start peeling off the protective tape at one end and move in towards the tip, gently pressing and removing air bubbles.
• When you apply the foils, remember to slowly press and push out the air bubbles as you go. If you miss it, you can peel off the foil a little, remove the bubble and continue.
• If you don't manage to remove the air bubble, pop it with a needle and press down.
• Now it's time to cut the tape to shape the ski with a knife.
• Please note that the tape will not adhere well to the vertical sidewalls of the skis or to the sloped part of the ski, the tape is only intended for the upper part of the top layer.

We offer

1. ECO foil 0.1mm gloss
2. matt foil 0.2mm structure
3. Premium foil 0.3mm gloss