Semi-static rope 10 mm Kaya Safety Magnifier Static Pro black polyamide 30kN
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Kaya Safety 10 mm semi-static rope – Static Pro magnifier (black) - 1m - By the meter
10 mm semi-static rope Kaya Safety Static Pro magnifier in black is an offer for people who are looking for a uniform rope in a discreet color. The black rope will be appreciated first by all emergency services.
10 mm semi-static rope - Kaya Safety Magnifier Static Pro (black) - most important features:
- weight: 61 g/m
- rope diameter: 10 mm
- material: PA – polyamide
- certification: EN 1891 type A
- tensile strength: 30.6 kN
- braid feed: 1%
- static elongation: 2.3% (50-150 kg)
- outer sheath mass: 39.9%
- rope type: semi-static
- color: black
Kaya Safety Lupa Static Pro 10 mm semi-static rope is a rope with low weight and good durability. Its uniform black color will be used in special services (army, police), as well as among survival groups and prepers. The process of dyeing polyamide in the mass makes the rope uniformly deep black. Black ropes are also used in civilian industries where we focus on discreetness, e.g. in theater performances, curtain lifting systems, scenography or decorations.
The parameters of the rope are very decent. The weight is only 61 grams/meter with a breaking strength of over 30 kN. Of course, it is recommended to use the load taking into account the safety factor, which is 1/10. The 10 mm Kaya Safety Lupa Static Pro semi-static rope in black has the same parameters as the white ropes of the Turkish manufacturer and meets the stringent requirements of the European standard EN 1891 A. The materials used make the Lupa Static Pro rope have excellent parameters in the following areas:
- resistance to discoloration (fading)
- sensitivity to UV radiation
- abrasion resistance
- protection against sheath pilling
The EN 1891 standard requires the manufacturer to mark the rope parameters. This is done by a tape located inside the rope (between the braid strands). This marking allows for the identification of the product, as it provides information on such parameters as year of production, EN standard, diameter and material from which the rope is made. All fall protection products must be inspected daily (before each use). In addition, a detailed periodic inspection is necessaryonce every 12 months. The inspection should be carried out by a competent person (in accordance with the EN 365 standard).
The rope is sold by the meter. By entering "quantity" in the box, e.g. "3", you will receive 1 section 3 m long.
We kindly ask you to carefully consider your purchases, as this is a product prepared for individual order and is not subject to refundable.
feedback Report comment