MEDICAL FINGER PULSE OXIMETER WITH COLOR OLED DISPLAY (PULSE METER + OXIMETER)

A device designed to diagnose oxygen saturation in blood

MODEL: CMS 50D

The pulse oximeter is very easy to use. The pulse oximeter has a large, clear and colorful display. It is also possible to set several display modes, which makes work more convenient.

When applied to the finger, the pulse oximeter non-invasively shows the blood saturation result, heart rate and perfusion index value within a few seconds.

Very useful results, especially for patients with low perfusion and darker skin tone.

Its small size allows you to take it with you on a trip, for a walk, etc.

The saturation of blood with oxygen (i.e. saturation) is marked with the symbol Spo2 and is expressed as a percentage. The normal oxygen saturation value in a healthy person is 93-99% - therefore it is worth having a pulse oximeter with you and constantly monitoring this data.

Performs measurements in a non-invasive way

By pressing one button you measure three important vital functions

• Quick measurement (about 7 seconds)
• Small size, light and easy to use
• It has a color OLED LCD display
• Four directions display mode changed with one button
• Bar waveform, so-called PLETH wave

Characteristics

• Measurement range: SpO2: 0% - 100%
• Heart rate measurement range: 30bpm – 250bpm
• Display method: bar graph and plethysmographic chart
• Power supply: 2 1.5V AAA alkaline batteries - not included
• Power consumption: less than 30mA.
• Accuracy: 1% for SpO2 and 1bpm for heart rate.

Margin of error: ±2% for the range of 70%-100% and undefined for the range below SpO2 70%, ±2bpm or ±%2 (whichever is greater) for heart rate.

Operating under low heart rate conditions: SpO2 and heart rate are displayed correctly when the heart rate duty rate is 0.4%. The margin of error for SpO2 is ±4% and for heart rate - ±2bpm or ±%2 (whichever is greater).

Ambient Light Resistance: The difference in measurement due to the difference in lighting conditions (artificial and natural light) is less than ±1%.

Automatic switch off: the device turns off automatically if it does not receive any signal for 5 seconds.

Optical sensor: Red light (wavelength 660nm, 6.65mW) Infrared (wavelength 880nm, 6.75mW)

If you are looking for a product of the highest quality at an attractive price, the offered model will be an excellent choice.

The pulse oximeter is often used in patients with:

• Respiratory diseases,
• Heart diseases,
• Hypertension,
• Diabetes,
• Patients requiring constant care.

Adjustable settings

By holding the button for 2 seconds, the heart rate monitor enters the settings mode:

• ALM - alarm (ON/OFF)
• BEEP - sound signal (ON/OFF)
• DEMO - demonstration mode (ON/OFF)
• BRIGHTNESS- display brightness (1-5)
• RESTORE- reset factory settings
• SPO2 ALM Hi- alarm - highest oxygenation level (30-100)
• SPO2 ALM Lo - alarm - lowest oxygenation level (30-100)
• PR ALM Hi - alarm - highest heart rate (30-250)
• PR ALM Lo - alarm - lowest heart rate (30-250)

Pressing the power button twice allows you to change the display of parameters in 6 different modes.