Electric Surfboard Fully waterproof

Function:1. Very clear, large 1.6-inch screen, speed and power at a glance, IP67 waterproof class.

2. In the two scenarios of using the electric skateboard and water surfing, the control mode can be switched freely.

3. The safely unlocked state of the start lock prevents accidents caused by improper operation after starting and ensures safety.

4. Launch GPS function to display speed and distance, speed and distance measurement.

5. Place the remote control on the wireless inductive charging base in the remote control's inductive charging zone and it can be charged at any time.

. Electric surfboard Fully waterproof

. Electric surfboard Fully waterproof

Specification:Item type: surf remote control

Material: ABS plastic

Weight: approx. 585 g/ 20.6 oz

Size: Approx. 16.5 x 4.4 x 7.6 cm/6.5 x 1.7 x 3.0 in

Screen Size: 1.6 inch

IP Waterproof Rating: Ip67

Interface Type: USB Interface

Speed ​​Mode: High-end, Mid-range, Low-end

Battery capacity: 1500mAh (with built-in battery)

Scene modes: surfing mode, skateboarding mode

Support wireless charging with wireless charging pad

Button type: switch button, setting button, brake/constant speed trigger, throttle trigger

. Electric surfboard Fully waterproof

. Electric Surfboard Fully Waterproof

How to use:VESC Tool: 1.13 ‑‑‑‑> 3.57 Firmware Version. Step 1: Turn on the ESC's power, connect the ESC to the computer and click "Welcome&Wizards" to "Connect Automatically" to confirm the connection.

Step 2: After connecting, click "Firmware" – "Included Files" (V6 select 60, V4 select 410&411&412), click "Yes", then submit.

Step 3: After the firmware is updated, disconnect the ESC and the computer.

Step 4: If the update fails If successful, turn off the ESC power, reconnect the battery and restart. Connect your computer and confirm your computer is connected.

Step 5: Enter “Firmware”, click “Bootloader”, select correct mode for reload (V6 to 60, V4 to 410&411&412).

Step 6: After the loader finishes, start the firmware update again from the first step (click firmware-->attach file-select the correct file...)

. Electric surfboard Fully waterproof

. Electric Surfboard Fully Waterproof

Package List: 1 x VX3 Remote Control

1 x PPM Cable

1 x Wireless Charging

p>

1 USB cable

1 x receiving chip

1 x chip connection line

3 x connection line

1 x Instruction

1 x floating sponge

. Electric surfboard Fully waterproof

. Electric Surfboard Fully Waterproof