The drills for the low-speed contra-angle are made of sintered carbide. The working part is equipped with perforation enabling precise work. The drills provide excellent cutting, which allows for effective cavity preparation.

Main features:

• They have cuts created in the drill head, thanks to which they cut effectively , ensuring minimal accumulation of contamination.
• Appropriately shaped working surface ensures comfort and precision during the procedure,
• Mounting: contra-angle
• Excellent cutting efficiency without the need for strong pressure
• li>
• High-quality material,

Drill finishing materials:

• Base connected to the contra-angle: tungsten
• Working part: sintered carbide with sharp cuts
• They are characterized by a much longer service life compared to diamond drills.

Carbide burs commonly used to prepare teeth for dental fillings before other procedures. They are characterized by the hardness of metal, making them perfect for cutting work, such as preparing cavities, cutting metal fillings and shaping bones during dental implantation procedures.

Carbide drills in the shape of a ball, commonly called a rose, are very similar for diamond drills, however, they have several features that distinguish them. The main difference is that, unlike diamond drills, they do not grind the enamel, leaving a smoother surface and reducing handle vibrations during the procedure. Thanks to the notch created in the head, these drills can perfectly cope with even hard structures, ensuring minimal accumulation of dirt. Cemented carbide burs are much easier to handle when it comes to removing metal-based restorations, as well as removing crowns during endodontic procedures.

The offer applies to a set of 5 drills.

Designations:

RA1 - diameter 0.8mm

RA2 - diameter 1.0mm

RA3 - diameter 1.2mm

RA4 - diameter 1.4mm

RA5 - diameter 1.6mm

RA6 - diameter 1.8mm

RA7 - diameter 2.1mm

RA8 - diameter 2.3mm